USED 1500 TON SAVAGE MODEL TFS-1500 TRAVELING GANTRY STRAIGHTENING PRESS and KLOCKNER Injection molding press for sale

WE ARE PLEASED TO OFFER THE FOLLOWING FOR YOUR IMMEDIATE PURCHASE CONSIDERATION

USED 1500 TON SAVAGE MODEL TFS-1500 TRAVELING GANTRY STRAIGHTENING PRESS MFD. 1985

PRESS CAPACITY - 1500 TONS, ADJUSTABLE FROM 15% TO 110% OF CAPACITY RATED. GANTRY TRAVEL - 35' HORIZONTAL TRAVEL. THE GANTRY IS POWER DRIVEN THROUGH RACK AND PINION GEARS AND CAPABLE OF TRAVELING OVER AND ACROSS THE POWERED ROLLER AND PRESSURE PAD ASSEMBLIES. THE PRESS FRAME IS EXTRA LONG TO PERMIT THE GANTRY TO TRAVEL BEYOND THE STRAIGHTENING AREA FOR DIRECT DOWN LOADING OF PART ON TO THE VEE BLOCKS FROM THE CRANE.

THIS ELIMINATES THE NEED FOR SIDE TRAVEL OF THE CRANE WHEN LOADING AND UNLOADING THE PRESS. THE GANTRY TRAVELS ON BEARING TYPE WHEELS ACROSS A HARDENED REPLACEABLE WEAR PATH. SIDE THRUST BEARINGS PREVENT MIS-ALIGNMENT. THE TRAVEL POWER IS SUPPLIED BY A SERVO MOTOR. A ROTARY ENCODER TRANSMITS POSITION INFORMATION TO A DIGITAL READ-OUT AT THE OPERATOR'S STATION.

GANTRY TRAVEL SPEED - 130" PER/MIN. RAM STROKE - ADJUSTABLE TO 24". DAYLIGHT - 42" FROM FACE OF NOSING TOOL TO TABLE. SHUT HEIGHT - 18" PRESS BED - 42' L-R X 48" F-B. TIE RODS - 16" DIAMETER, GROUND, POLISHED HARD SURFACED AND HARD CHROME PLATED 1045 STEEL. HYDRAULIC DRIVE MOTOR - 100 HP 460/3/60. MAIN CYLINDER - 35" BORE, 22" RAM DIAMETER, 24" STROKE, 4000 PSI WORKING PRESSURE. CHROME PLATED BORE & RAM. JACK RAMS - (2) 5" BORE WITH 3-1/2" DIAMETER HARDENED, GROUND, POLISHED AND CHROME PLATED RODS. DIGITAL READ-OUTS - DIGITAL READ-OUTS LOCATED AT OPERATOR'S STATION FOR RAM POSITION, GANTRY POSITION, STRAIGHTENING BLOCK POSITIONS, ROLLER BLOCK POSITIONS. ROTARY ENCODERS ARE USED TO TRANSMIT THE INFORMATION FROM EACH DEVICE TO THE READ-OUT. DWELL TIME - AN ADJUSTABLE 0 TO 10 SECOND DWELL TIMER WILL ACTUATE WHEN THE RAM IS AT FULL ADJUSTED PRESSING FORCE. THE DWELL TIME IS DISPLAYED BY A DIGITAL READ-OUT. HYDRAULICS.

AN OIL GEAR RADIAL PISTON PUMP WITH V-W CONTROLS POWER THE PRESS. REMOTE ADJUSTABLE CONTROLS AT THE 1500 ton straightening press

OPERATOR'S STATION ADJUST BOTH TONNAGE AND RAM SPEEDS. RESERVOIR IS SIZED FOR 1-1/2 TIMES THE CYLINDER VOLUMNS AT FULL STROKE. THE RESERVOIR INCLUDES SINGLE BOLT CLEAN-OUTS, TEMPERATURE AND LEVEL GAUGES, AND OVERSIZE BREATHER. A PRE-FILL VALVE CONTROLS FILLING AND EMPTYING OF THE MAIN RAM. EXTERNAL INLET AND RETURN LINE FILTRATION IS STANDARD. AN AIR-COOLED HEAT EXCHANGER IS MOUNTED AT THE RESERVOIR. HYDRAULIC PRESSURE - 3000 PSI AT 1500 TONS. PRESSURE GAUGE - 6" DIAMETER, LIQUID FILLED WITH BOTH PSI AND TONS ON RAM SCALES. ELECTRICAL - 460 VOLT/3 PHASE/60 CYCLE. 115 VOLT CONTROL VOLTAGE. LUBRICATION.

THE LUBRICATION SYSTEM PROVIDES POSITIVE GREASE LUBRICATION TO THE (4) TIE ROD BUSHINGS AND THE (4) GANTRY AXLES AT A 30 MINUTE TIME CYCLE. THE PUMP IS ELECTRICALLY POWERED WITH A 12 LB. RESERVOIR CAPACITY. THE SYSTEM INCLUDES THE FOLLOWING ALARMS: (1) LOW RESERVOIR LEVEL (2) SUPPLY LINE FAILURE (3) FEED LINE FAILURE. THIS PERMITS MONITORING OF THE ENTIRE SYSTEM. ROLLER & PRESSURE STANDS - THE PRESSURE STAND AND ROLLER STANDS ARE POWERED ACROSS THE PRESS BED BY A GEAR/REDUCER MOTOR. FEED BACK INFORMATION THROUGH A ROTARY ENCODER TO A DIGITAL READ-OUT PANEL. THE ROTARY STANDS ROTARY MOTION ARE POWERED BY A DC MOTOR. THE STANDS TRAVEL ACROSS THE BED ON SPRING LOADED BEARING TYPE WHEELS TO LIFT THE STANDS OFF THE PRESS BED. SIDE THRUST ROLLERS PREVENT MIS-ALIGNMENT OF THE STANDS. THE ROLLER WHEELS TRAVEL ON HARDENED AND GROUND REPLACEABLE FLAT WAYS. EQUIPPED WITH: POWER WORKPIECE ROTATION POWER LIFT POWER ANVIL POSITIONING POWER ROTATION STAND POSITIONING OPERATOR'S CONTROL STATION OPERATOR'S PLATFORM

APPROXIMATE WEIGHT - 386,000 LBS.
GANTRY TRAVEL SPEED - 130" PER/MIN.
RAM STROKE - ADJUSTABLE TO 24".
DAYLIGHT - 42" FROM FACE OF NOSING TOOL TO TABLE.
SHUT HEIGHT - 18"
PRESS BED- 42' L-R X 48" F-B.

Paramount Industries helps industrial Equipment Buyers locate, purchase and arrange delivery on the best buys in used Hydraulic presses. We are a trusted source that knows true value in this highly specialized market. Please e-mail Ted Gillespie OR CALL 800 882-6165 for complete details and pricing on the above listings or a complete fax list of available presses. Act now before this one is gone!

CONTACT SELLER

Please fill in below form info and submit only once

1500 TON KLOCKNER

WINDSOR HORIZONTAL PLASTIC INJECTION PRESS

Excellent Condition / May be seen Under-Power

Located 19 miles North of Detroit, Michigan

Horizontal Acting PRESS for Composite molding production

190 oz Shot Platen 97” x 72” overall

Bedsize 73.5” x 63” zoom images to enlarge

Paramount Industries has over 75,000 square feet to serve our customers right in the heart of Metro Detroit's automotive industrial manufacturing center. Our service, staff and quality products continues to keep our customers satisfied during the entire sales process. Experience the difference when tapping into savings bu using Paramount's buying power today. Make your next production plant equipment purchase though our network of buyers and sellers.!

on this Pre-Stressed Tie
Rod Housing Type Hydraulic press.
New in 2001and under power today.
Tonnages: Pressing: 1000
Net stripping (without tool): 100
Net Lift @ Fast Open: 15
Bed Cushions (each): 250
Bed Cushion Reset (each): 25
Maximum Die Weight: 16
Dimensions: Daylight: 64” and Stroke: 48”
Shut Height (between bolsters): 16”
Die Area: 132”lr x 66” fb
Bed Bolster: 132”lr x 66” x 8”
Slide Bolster: 132”lr x 66”fb x 4”
Between Housings: 134”lr x 68”fb
Floor To Face Of Bed Bolster: 24”
Stroke Of Each Cushion: 8”
Bed Cushion Pad (each): 54” x 54”
Cushion Location: (center to center): 60”
Operating Speeds: Fast Close: 1400 ipm
Slow Close: 300 ipm and Pressing 5 - 50 ipm
Stripping: 20 - 200 ipm
Fast Open: 1400 ipm
Bed Cushion Reset: 225 ipm
Overall Height Above Floor: 324”
Electrics & Controls incluided
Inspect Under Power in Metro Detroit MI!!!!!

Call Ted Gillespi of Paramount Industries for further
details and pricing on this 1000 ton Williams & White
Hydraulic stamping Press.

1000ton-williamsandwhite.jpg (66549 bytes)

Paramount Industries has partnered with used machinery brokers and production plants for over 20 years to help industrial Equipment Buyers locate, purchase and arrange delivery on the best buys in used Hydraulic stamping presses and production equipment for the metal working industry. We are a trusted source that knows true value in this highly specialized market. Please e-mail Ted Gillespie for complete details and pricing on the above listings or a complete fax list of available presses. Act now before these 1000 ton presses are gone!

HPM 1500 ton Deep Draw Hydraulic Press for sale by Paramount Industries Inc.

A major automobile manufacturer has contracted with Paramount Industries to liquidate all, or partial lots of one of their local Detroit production plants. Power-on inspections now taking place for 10 major presslines of varying capacities and all miscellaneous metal stamping equipment. This is a once in a lifetime opportunity to buy well maintained working metal stamping presses for pennies on a dollar invested. Click here to see all this automotive plant liquidation listings, photos and spec sheets.