CINCINNATI GILBERT FLOOR TYPE BORING MILL

MODEL CF, X-156", Y-108", 1715 RPM, #50 TAPER, 1976
REBUILT-1996 (102334) Great working condition


1. PRICES are as is, where is, 
unless otherwise noted. Prices
are exclusive of any and all 
State,Country, or Federal taxes.
Any taxes shall be paid by the
buyer in addition to the quoted
purchase price.



2. TERMS are cash with order
unless otherwise arranged.
Title to the machine or machines
does not pass to the buyer until
it is paid for in full. All
quotations are subject to prior
sale and change without notice.



3. SHIPMENTS: Dates of delivery
are determined from the date of
our acceptance of any order or
orders by the buyer and see
estimates of approximate dates of
delivery, not a guarantee of a
particular day or delivery.



4. There are no provisions
with respect to this quotation
which are not specified herin. 
If buyer places an order with
us based on this quotation,whether
in writing or orally, then this
quotation will consitute the
entire contract between the buyer
and us with respect to subject
matter of this quotation. Any
agreement so made shall be
governed by the law of the
 State of Michigan.



5. Information is obtained from
 sources deemed reliable,however,
we urge your inspection of this
equipment to confirm any pertinent
specifications prior to your purchase.
We will not be responsibele for any
typographical errors or ommissions.

NEW - 1967/96

SPECIFICATIONS: (STOCK #102334)

SPINDLE DIAMETER...............: 4"
SPINDLE TAPER..................: CAT #50
VERTICAL TRAVEL OF HEAD........: 108"
HORIZONTAL TRAVEL OF COLUMN....: 156"
SPINDLE TRAVEL (IN/OUT)........: 36"
FLOOR PLATES...................: 8' X 12'
MOTOR..........................: 30 HP
QUILL FEEDS....................: .0006 TO .125 IPR
SPINDLE SPEEDS.................: 8 - 1715 RPM
RISER TABLE....................: 4' X 10' X 30"
QUILL DIAMETER.................: 8" DIA.

EQUIPPED WITH:

DIGITAL READOUTS (2) AXIS - SONY MAGNASCALES
ELECTRICS 440 VOLT
AC SPINDLE DRIVE
DC RACK AND PINION COLUMN DRIVES
BIJUR LUB SYSTEM
(3) BEDWAYS SOFT FLAKED
POWER DRAW BAR
FULL PENDANT
COLUMN AND BED REBUILT AND RESCRAPED
MACHINE IS UNDER POWER

PRICE.........................: $129,500.00 or best offer

Offered by- Broker:E-mail Ted Gillespie

for complete details

* #100 Ton Minster PM3 * #1000 Ton Danly Press . Model# SE4-1000 * #1000 Ton Danly SE4-1000-108-84 * #1000 Ton U.S.I Clearing 4-Point Straight Side Presses * #300 TON MINSTER HEAVY STAMPER *#600 TON MINSTER HEAVY STAMPER SSDC PRESS * #800 TON DANLY S4-800 * #800 TON WARCO PRESS * #SE2-600-120 x 60 CMC-BLISS PRESS * #USI -CLEARING 600 Ton *

3000 Ton CLEARING Model #F23000-318-72 Straight Side Press -S/N 44-13000 -Age: Rebuilt in 1999 Including Mechanical & Electrical

SPECIFICATIONS: -Capacity: 3000 Tons -Stroke: 22" -Shut Height: 40" -Adjustment: 14" - Windows: 40" Wide x 36" High - Bed Area: 318" x 72" -Area of Slide: 292" x 54" - Bolster (2-Piece): 318" x 72" x 12" -Strokes Per Minute: 8 - -EQUIPPED WITH:Air Clutch *Air Counterbalance *(6) Air Cushions – 11" Stroke * Motor Data: 150 HP

This Clearing press is one of 3 units available for inspection and immediate purchase. Call Paramount Industries for a price quote.

3000 Ton CLEARING Model #F23000-318-72 Eccentric Geared Straight Side Press -S/N 46-12675P -Age: N/A --SPECIFICATIONS:
Capacity: 3000 Tons - Stroke: 22" -Shut Height: 40"
Adjustment: 14" - Bed Area: 72" x 318"
Area of Slide: 292" x 54" - Bolster (2-Piece): 318" x 72" x 12" - Windows: 40" Wide x 36" High
Speed: 8 SPM - EQUIPPED WITH:Air Clutch * Air Counterbalance *(6) Air Cushions – 11" Stroke * 150 HP Motor
Call Ted Gillespie at Paramount Industries for a price quote on this Clearing press.